Shock Absorber Type 640 Road
As standard, the fork has a very soft spring. The Wilbers solution uses slightly harder, progressive springs.
On the rear shock, the spring rate is adjusted via a slightly harder spring, in combination with optimised rebound and compression damping.
The suspension geometry on the front and rear axle is sensibly adjusted via the negative spring travel. Originally, the vehicle has very high negative spring deflections. These are adjusted by a slightly shorter suspension strut, so that the original seat height is maintained.
This results in a better ride and better handling, which also contributes to a safer ride.
The basic edition of the Wilbers Adjustline mono shock absorber comes along with the same technology as the more complex versions. The difference is that here we leave out the compression reservoir and thus the options for adjusting high- and low-speed compression. Nonetheless this shock absorber does not make any compromises concerning response behavior or durability. The radial piston, wet run, teflon guided self-aligning bearings and other features redefine the quality of a standard shock. Like usual the spring preload can be continuously tuned and the rebound can be set over an open-bleed system in 22 clicks. The shock absorber can be retrofitted with many other Wilbers accessories.
Product may vary from picture.
Additional Notes:
Compatible vehicles:
- 2020 - 2025 Triumph Tiger 900 Rally Pro | C701
Pickup available at EPM Performance Imports
Usually ready for pickup or shipment in 3-4 weeks.
Shock Absorber Type 640 Road
Edition: Blackline | Preload Adjuster: Hook Wrench | Lift/Lowering: Std
-
EPM Performance Imports
Pickup available, Usually ready for pickup or shipment in 3-4 weeks.
3 Fedornak Freeway
Unit 1
Whiting NJ 08759
United States+17327869777
Customers who bought this item also bought
Let customers speak for us
Excellent service, quick turnaround, HAPPY customer!
Great product great communication fast delivery!!!
5 star
Everything I wanted and never knew I needed. Spec’d perfect. Didn’t even have to adjust sag.
100 times better than stock, wife on back says nothing compared to ouch or ugh when we hit a bump
I have spinal stenosis, this was exactly what I was looking for.
huge improvement !
replaced the ktm garbage, which had completely failed and was bouncing and bouncing and bouncing
Excellent service throughout. Thank you!
Fits perfectly
Very high quality
If you have a 40–50 lb rider on a Husqvarna EE 5 (or KTM SX-E 5 / TC 50), swapping out the factory shock spring for this 25 N/mm spring is hands-down the single best suspension upgrade you can make.
The stock rear spring is notoriously oversprung for young kids. Before installing this, our rider was getting bucked over braking bumps, the rear end skittered out in flat turns, and it was physically impossible to dial in correct rider sag—even backed all the way out on the preload collar.
Swapping to the 25 N spring completely transformed the bike's balance:
True Sag Numbers: Finally allowed us to set proper race sag (targeting ~60–65 mm) while still maintaining healthy static free sag.
Chassis Balance: Balances out the front WP air fork so the bike stays level and planted instead of riding stinkbug into turns.
Instant Confidence: The rear wheel actually tracks through acceleration chop and ruts now rather than deflecting. Our rider felt the difference on lap one—much less fatigue and far more control over rough, choppy sections.
Fit and finish (47x130) are spot-on, drop-in replacement with the stock WP shock collars, and the coating holds up to roost and power washing. Don’t waste time fighting the stock spring if your kid is under 55 lbs—this 25 N spring fixes the rear end completely. Highly recommend!
Awesome addition to the 390. The spring had made 2 up riding much more comfortable.
Sterrring damper is amazing! Got rid of all the head shake at high speeds. I only have it 5 clicks in and it's working as it should. The guys at EPM are great. Thanks!
Got shipped out right away
Easy to install
